Waterproof Case

The new Waterproof Case fits your ContourHD and ContourHD1080p Wearable Camcorder like a hard plastic glove. Slide your ContourHD into the case, latch it down, and begin capturing your favorite water adventures. Don't worry, the waterproof case keeps your favorite functionality like a single record button, laser alignment, and TRail mounts. Even better are the two safety latches on the back of the case to lock it onto any of the TRail mounts. Suitable for the VholdR Wearable Camcorder as well, but with limited functionality on the record switch and power button.

Specs

• Waterproof up to 10 meters
• Compatible with TRail mounts and/or standard 1/4" -20 mounts

Flat Surface Mount

An extra Flat Surface Mount to attach the ContourHD or VholdR Wearable Camcorder virtually anywhere. Ideal for non-vented helmets and flat surfaces, this mount uses an all-weatherproof removable adhesive pad to adhere to almost any surface.

Goggle Strap Mount

Wear your ContourHD or VholdR Helmet Camera on your goggles. Slide your strap into the mount, click the rails in place, and you are ready to record whatever you see, completely hands free.

Vented Helmet Mount

The New Vented Helmet Mount has been given a serious upgrade in how the mount tightens and clamps down to your helmet. Find your mounting location, slide the straps through, and cinch them down. Slide your ContourHD or VholdR Wearable Camcorder on the rails and you are ready to go. Oh yeah, and tilt the camera forward or back to find the best angle.

Windshield Mount

A powerful suction cup mount from our friends at Panavise attaches your ContourHD or VholdR Helmet Camera to any windshield or car body. This well designed mount makes it simple to turn, tilt, and rotate your car camera 360°. Suction pad advised for windshields and flat (non-porous) surfaces.

Mount Adhesive

Replacement Adhesive Pads to remount your Flat Surface Mount. Ideal for flat, non-porous, and clean surfaces, we have two sizes available.
Large: Use with VholdR Flat Surface Mount
Small: Use with ContourHD Flat Surface Mount

Carrying Case

Pack your ContourHD Wearable Camcorder, up to 4 microSD cards, an extra battery, and a USB cable with you where ever you go. This compact but durable case is the perfect compliment to make sure your wearable cam and accessories never get lost in your gear bag

Lens Kit

The Lens Kit is a little TLC for your ContourHD or VholdR Wearable Camcorder. It includes extra lens covers and even a replacement Lens Ring for when you put it through the ringer. And even better, with the Lens Adaptor Ring, you can now screw on a standard 37mm lens filter to get the perfect shot in the toughest lighting conditions.

Handle Bar Mount

The New Handle Bar Mount puts your ContourHD or VholdR Wearable Camcorder in the middle of the action. Lie your camera on its side, rotate the lens 90 degrees, and slide it onto the top of the mount. Tighten the mount down to fit any standard 29mm handle bars and with a 360 degree rotation you can shoot at any angle.

Universal Mount Adapter

Now your ContourHD or VholdR Wearable Camcorder is ideal for your favorite camera mounts. Universal Mount Adapter includes TRails on both sides, has a "female" 1/4"-20 screw on the bottom to screw your camera to any mounts or tripods that have their own male ¼”-20 screw.

Rechargeable Battery

Use your spare battery to continue recording the action. Get up to an additional 2 hrs (VholdR) and up to 3 hrs (ContourHD) of record time. Recharge using your USB cable with your ContourHD or VholdR Helmet Cam. See compatible Battery Chargers as well.

Car Charger

Charge your camera on the go. Keep recording while charging your camera or power down to recharge even faster. Note: VholdR is compatible for charging only.

Universal Wall Charger

An international wall charger to plug your ContourHD Wearable Camcorder directly into the wall. Charge the single battery in the camera or connect the wall charger to the USB Battery Charger (sold separately). Select the plug for the country, connect the USB to your camera, and in about 4 hours your camera will be ready to rejoin the action.

USB Battery Charger

Charge your battery using your computer or any USB compliant wall charger. Just connect the charger to your computer's USB port and pop your battery into the charger. This charger is compatible with ContourHD and VholdR batteries.